Cart

NRF51824-QFAA-R

NORDIC NRF51824-QFAA-R

image shown is a representation only

NORDIC

BLE-SOC automotive
Supplier: Nordic
Matchcode: NRF51824-QFAA-R
Rutronik No.: RFMCU1104
Unit Pack: 1
MOQ: 1
package: QFN48pin
Packaging: REEL
In Stock
5.25 $
5.25 $

Prices

1 5.25 $
3 5.13 $
7 5.00 $
17 4.84 $
44 4.68 $

BLE-SOC automotive Description

Processing power

The nRF51824 incorporates a 32-bit Cortex-M0 processor enabling demanding automotive sensor applications to be realized in a single chip solution.

Flash memory

nRF51824 is a flash-based wireless SoC. Flash brings the added benefits of flexibility in development and significant appeal of Over The Air Device Firmware Upgrades (OTA DFU) This allows for products using the nRF51824 to upgrade their firmware (application and protocol stack) after production when out in the field.

Multiprotocol radio

The 2.4GHz radio supports multiple protocols including Bluetooth low energy, ANT and 2.4GHz proprietary. The radio has high definition RSSI and highly automated functionality, including EasyDMA for direct memory access during packet send and retrieve.

Power Efficiency

The nRF51824 SoC is an extremely power efficient device that can run from a supply between 1.7V and 3.6V. All individual peripherals and clocks offer complete flexibility of power down when not required for task operation thus minimizing power consumption to a minimum. The IC has a comprehensive system of automated and adaptive power management features. These features range across the entire IC’s operation from power supply switching to peripheral bus/EasyDMA memory management, to automated shut down of all but the absolute essential peripherals required to perform a task.

Software support

Nordic Semiconductor offers an extensive range of freely-available software to support its wireless SoCs. The support offering comes in the form of wireless protocol stacks for Bluetooth low energy, ANT and 2.4GHz proprietary and are known as SoftDevices. SoftDevices are pre-compiled, pre-linked binary files. SoftDevices can be programmed in nRF51 series SoCs and are downloadable from the Nordic website.

The nRF5 SDK is also provided, nRF5 SDKs offer numerous software examples and modules to assist and speed up your development cycle on the nRF51824.

Features

  • AEC-Q100 certified
  • Bluetooth low energy/2.4GHz multi-protocol SoC
  • 32-bit Cortex-M0 CPU
  • Flash-based SoC architecture with 256kB flash + 16kB RAM
  • Application SW development independent of protocol stack
  • Over-The-Air field updatable application SW and/or protocol stacks
  • Dynamic on-air packet payload lengths
  • Software stacks available as downloads
  • Programmable output power settings
  • Programmable Peripheral Interconnect (PPI)
  • Flexible, programmable 31 pin GPIO
  • RSSI
  • Full range of serial interfaces including SPI, 2-wire and UART
  • 128-bit AES HW encryption co-processor
  • 10-bit ADC
  • RAM mapped FIFOs using EasyDMA
  • Memory Protection Unit (MPU)
  • On chip DC/DC converter
  • Automated, granular power management for each peripheral
  • Quadrature demodulator
  • Wide supply voltage range – 1.8 to 3.6v
  • Compact QFN48 6 x 6mm package


Parameter

Frequency min
2408 MHz
Frequency max
2480 MHz
Datarate
2000 kbps
Oper.temp.min.
-40 °C
Memory
FLASH
Memory size
256 kB
MCU Architectur
32 bit
Supply Volt.min
1.9 V
P(out)
4 dBm
Sensitivity
-96 dBm
RAM
16 kB
GPIO
31 no.
ADC resol.max
10 bit
ADC channels
8 no.
SPI
YES
I²C
YES
Other interface
UART
Oper.temp.max
105 °C
Supply volt.max
3.6 V
Automotive
AEC-Q(100)
Package
QFN48pin
Leadfree Defin.
10
Packaging
REEL
ECCN
EAR99
Customs Tariff No.
85423990000
Country
Philippines
ABC-Code
A
Supplier Lead time
16 weeks
With the articles in your cart you can send us an order, or - if you have further questions - a non-binding request.

Password forgotten?