image shown is a representation only
Program. Adaptor for IoD-09
Supplier: 4D SYSTEMS
Rutronik No.: DISMON1289
Unit Pack: 1
Program. Adaptor for IoD-09 Description
DISMON1289 is the article number for 4D-UPA
4D-UPA Simple STEP Model:
The 4D-UPA (Universal Programmer Adaptor) is a universal programmer designed to work with multiple 4D Systems display modules.
•It has a 30 way FFC connector at the top of the module, for connecting to gen4-uLCD-xx display modules.
•On the opposite side is a 10 way FFC connector, for connecting to gen4-IoD-xx display modules.
•Located centrally in the larger rectangular outline, are pads associated with the gen4-uLCD-xx modules. These break out all the signals which come to/from the gen4-uLCD-xx modules.
•5 of the above signals are the universal 4D RESET/GND/TX/RX/5V signals, these are located together to enable interfacing/programming of the uLCD and uOLED display modules, such as the uLCD-43DT and uOLED-128G2.
•The outer 2 sets of 6 holes are for mounting and programming the IoD-09TH display module. The IoD-09TH pads are slightly offset, enabling a simple 'friction fit' interface to the 4D-UPA, no soldering or headers are required - although headers can be added (not included) if required.
The 4D-UPA replaces the need for all current 4D programmers, such as the uUSB-PA5, gen4-PA, gen4-IoD-PA, and the 4D Programming Cable. The 4D-UPA features a microUSB jack, for connection to your PC. Cable is not included with the 4D-UPA or in our Starter Kits, this needs to be purchased seperately.
The 4D-UPA can be used for programming gen4 display modules, gen4-IoD display modules, IoD-09TH display modules, uLCD and uOLED display modules. I can also be used for interfacing to a breadboard for prototyping, or for interfacing to virtually any host.
- OSD Set
- N/A Y/N
- Power supply
- N/A Y/N
- Leadfree Defin.
- Customs Tariff No.
- Supplier Lead time
- 10 weeks