image shown is a representation only
1.7 160x128 px smart OLED
Supplier: 4D SYSTEMS
Rutronik No.: DISMON1272
Unit Pack: 1
1.7 160x128 px smart OLED Description
Low-cost OLED display graphics user interface solution.
•160 x 128 resolution, 65K true to life colours, PMOLED screen.
•1.7" diagonal size, 52 x 32 x 6.1mm. Active Area: 33.6mm x 27mm.
•No back lighting with near 180° viewing angle.
•Easy 10 pin interface to any external device: VCC, TX, RX, GND, RESET, IO1, IO2, 3.3V.
•Powered by the 4D-Labs GOLDELOX graphics processor highly optimised for 4DGL, the high level 4D Graphics Language.
•2 x GPIO ports supports:
•A/D converter with 8/10 bit resolution
•Complex sound generation
•Dedicated RTTTL tune engine
•10K bytes of flash memory for user code storage and 510 bytes of RAM for user variables (255 x 16bit vars).
•1 x Asynchronous hardware serial port, TTL interface, with 300 baud to 600K baud.
•On-board micro-SD memory card adaptor for storing of icons, images, animations, etc. Supports 64Mb to 2Gig micro-SD memory cards. A SPI compatible micro-SD card is required.
•Comprehensive set of built in high level 4DGL graphics functions and algorithms that can draw lines, circles, text, and much more.
•Display full colour images, animations, icons and video clips.
•Supports all available Windows fonts and characters (imported as external fonts).
•4.0V to 5.5V range operation (single supply).
•Module dimensions: 42 x 36 x 14mm (including corner plates).
•Weighing ~ 11g.
•Display Viewing Area: 33.6 x 27mm
•Back plate with 4 x 3mm holes for mechanical mounting.
•CE Compliant (Modules with CE Mark)
THIS DISPLAY CAN BE ADAPTED TO ARDUINO SBC WITH 4D Arduino Adaptor Shield II (DISMON1274)
- 1.7 inch
- 160x128 pixel
- 100 cd/m²
- RGB 65K
- 36 mm
- 13.7 mm
- Viewing angle
- N/A u/d/l/r
- Operating temp.
- -35 - +75 °C
- Display Type
- TFT with Touch.
- TFT connector
- 10 pin int
- Leadfree Defin.
- 42 mm
- Customs Tariff No.
- Supplier Lead time
- 14 weeks