ULCD-144-G2

DISMON1273 is the article number for uLCD-144-G2
uLCD-144-G2 STEP Model:
https://4dsystems.com.au/mwdownloads/download/link/id/264/

Low-cost LCD display graphics user interface solution.
•128xRGBx128 resolution, 65K true to life colours, LCD-TFT screen.
•1.44" diagonal size, 43 x 31 x 6.4mm. Active Area: 25.5mm x 26.5mm.
•LED back lighting with greater than 150° viewing angle.
•Easy 10 pin interface to any external device:
3.3Vout, IO2, GND, IO1, RESET, GND, RX, TX, +5V, 5V OUT.
•Powered by the 4D-Labs GOLDELOX graphics processor highly optimised for 4DGL, the high level 4D Graphics Language.
•2 x GPIO ports supports:
•Digital I/O
•A/D converter with 8/10 bit resolution
•Complex sound generation
•Dedicated RTTTL tune engine
•Multi-Switch Joystick
•Dallas 1-Wire
•10K bytes of flash memory for user code storage and 510 bytes of RAM for user variables (255 x 16bit vars).
•1 x Asynchronous hardware serial port, TTL interface, with 300 baud to 600K baud.
•On-board micro-SD memory card adaptor for storing of icons, images, animations, etc. Supports 64MB to 2GGB micro-SD as well as micro-SDHC memory cards starting from 4GB and above. A SPI compatible micro-SD card is required.
•Comprehensive set of built in high level 4DGL graphics functions and algorithms that can draw lines, circles, text, and much more.
•Display full colour images, animations, icons and video clips.
•Supports all available Windows fonts and characters (imported as external fonts).
•4.0V to 5.5V range operation (single supply).
•Module dimensions: 31 x 36.2 x 14mm.
•Weighing ~ 8.1g.
•Display Viewing Area: 26.5 x 25.50mm
•4 x Mounting Holes with 2.0mm diameter for mechanical mounting.
•RoHS Compliant.
•CE Compliant (Modules with CE Mark)

THIS DISPLAY CAN BE ADAPTED TO ARDUINO SBC WITH 4D Arduino Adaptor Shield II (DISMON1274)