image shown is a representation only
2.8 240x320 DIABLO16+coverlens
Supplier: 4D SYSTEMS
Rutronik No.: DISMON1365
Unit Pack: 1
2.8 240x320 DIABLO16+coverlens Description
DISMON1365 is the article number for gen4-uLCD-28D-CLB
gen4-uLCD-28D Simple STEP Model:
gen4-uLCD-28D-CLB Simple STEP Model:
gen4-uLCD-28DT Simple STEP Model:
2.8" gen4 Series Intelligent Display Module with DIABLO16 Graphics Controller
The gen4 2.8” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.
The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.
These specific gen4 modules features a 2.8” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), and resistive touch. They is powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.
The 2.8” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.
The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the User with a wealth of options for programming and controlling their System.
The gen4 series of Integrated Display Modules features a 30 pin ZIF socket, designed for a 30 pin FPC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.
The gen4 series of modules has been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.
Models in this size:
- gen4-uLCD-28D (non Touch, without Cover Lens Bezel)
- gen4-uLCD-28DT (Resistive Touch, without Cover Lens Bezel)
- gen4-uLCD-28D-CLB (non Touch, Cover Lens Bezel)
THIS DISPLAY CAN BE ADAPTED TO ARDUINO SBC WITH 4D Arduino Adaptor Shield II (DISMON1274)
TO USE THE DISPLAY WITH A RASPBERRY PI SBC PLEASE ADD THE GEN4-4DPI SERIAL ADAPTOR (DISMON1328)
- 2.8 inch
- 240x320 pixel
- 170 cd/m²
- 65K RGB
- 67.2 mm
- 7.3 mm
- Operating temp.
- -20 - +70 °C
- Display Type
- TFT LCD
- TFT with Touch.
- TFT connector
- 30 way FPC
- Leadfree Defin.
- 87.6 mm
- Customs Tariff No.
- Supplier Lead time
- 10 weeks