Cart

GEN4-4DPI-70CT-CLB

4D SYSTEMS GEN4-4DPI-70CT-CLB

image shown is a representation only

4D SYSTEMS

7.0 480x800 touch RaspberryPi
Supplier: 4D SYSTEMS
Matchcode: GEN4-4DPI-70CT-CLB
Rutronik No.: DISMON1356
Unit Pack: 1
MOQ: 1
package: N/A
Packaging: INDIVIDUAL
On request
72.72 $
72.72 $

7.0 480x800 touch RaspberryPi Description

7.0" Gen4 Primary Display for the Raspberry Pi & ASUS Tinker Board - Capacitive Touch

The gen4-4DPi range are Primary Display’s for the Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero and Pi Zero W & ASUS Tinker Board, which display the primary output of the Raspberry Pi & ASUS Tinker Board, like what is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel or Capacitive Touch panel, enabling the gen4-4DPi to function with the Raspberry Pi & ASUS Tinker Board without the need for a mouse.

Communication between the gen4-4DPi and the Raspberry Pi & ASUS Tinker Board is interfaced with a high speed 48Mhz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression, and features a customised DMA enabled kernel. This combination allows this display to output high frame rate compared to other SPI display solutions, when displaying a typical image/video, and can achieve higher depending if the image can be compressed.

The gen4-4DPi is designed to work with the Raspbian Operating System running on the Raspberry Pi & ASUS Tinker Board, as that is the official Raspberry Pi & ASUS Tinker Board operating system. It is also compatible with Pixel and Scratch.

The gen4-4DPi range connects to the Raspberry Pi & ASUS Tinker Board’s 40 pin header using the gen4-4DPi Adaptor, which then connects to the gen4-4DPi display module using a 30-way FFC Cable.

Mounting of the gen4-4DPi is achieved with the 4x 4mm mounting holes present on the Resistive Touch Display Modules, enabling standard screws to fasten the Gen4-4DPi as required, or via the adhesive supplied on the Cover Lens Bezel which is part of the Capacitive Touch Version.

Parameter

Panel size
7 Inch
Resolution
480x800 Pixel
Aspect ratio
3:5
Backlight
LED
Brightness
475 cd/m²
Viewing angles
70/60/140 °
Technology
TFT LCD
Contrast
500:1
Reaction time
N/A ms
Video input
N/A
Interactive
Cap Touch
Oper.temp.
-20 - +70 °C
Fanless
YES
24/7 certified
N/A
Length
190.1 mm
Height
9 mm
Width
121.9 mm
Weight
N/A KG
Open frame
NO
Powerconsumpt.
4V - 5,5V watt
Automotive
NO
Package
N/A
Leadfree Defin.
10
Packaging
INDIVIDUAL
ECCN
5A992
Customs Tariff No.
85371091200
Country
Australia
Supplier Lead time
8 weeks
With the articles in your cart you can send us an order, or - if you have further questions - a non-binding request.

Password forgotten?