image shown is a representation only
7.0 Black Plastic Bezel
Supplier: 4D SYSTEMS
Rutronik No.: DISMON1321
Unit Pack: 1
7.0 Black Plastic Bezel Description
DISMON1321 is the article number for 4D-BEZEL-70B
7.0" Bezel STEP Model:
4D Display Bezels
4D Systems has designed and developed three ABS plastic bezels to facilitate mounting and settling of units when using 4D Systems intelligent display modules.
The 4DBEZEL-70B (Black) is suitable to use with the uLCD-70DT Intelligent Display and Armadillo-70T Linux based Display Module.
These bezels provide not only a sleek cover to 4D Systems display modules but also an easy method to panel mount the display module into a secure enclosure. Spring clips attach to the bezel in four locations to tightly hold onto enclosure or wall panel. This offers a range of panel thickness from 1mm to 2.5mm without the need to add washers.
NOTE: These Bezels are not intended to be used with the gen4 Series of Display modules and are not guaranteed to work with displays of similar size from other manufacturers. For Bezels to use with the gen4 Series of Intelligent Displays look for the gen4-Bezel range.
This bezel is designed for indoor use only. It is not weather-sealed, nor does it bear any Ingress Protection (IP) rating. Use indoor with care--preferably in a clean environment as the bezel offers little protection to the circuitry against moisture or particles.
- 198 mm
- 4,4 °C
- Leadfree Defin.
- Customs Tariff No.
- Supplier Lead time
- 8 weeks